Separate names with a comma.
If I'm rehabbing a 205K Gen 2, do I become an automatic member if I can get the thing running?
Thanks for that suggestion. It was all the way locked down, though. I did recharge the 12v which was down to around 10v. Now, I do hear more...
Found it, seems to be cam position sensor
On the driver's side of the cylinder head, there are 3 electrical connectors. 1 is O2 from the exhaust manifold, 1 is cylinder head coolant temp?...
And, the MAIN Battery symbol is red on the LCD. I can also hear a faint click sometimes in the hybrid battery.
The last thing that happened to the car before parking was a connecting rod when through the engine block. So, I believe the hybrid battery was at...
I've gotten everything back together after putting the motor in, except windshield wipers, windshield washer reservoir, air intake, etc. I put the...
I think I found the squiggly black tube that goes to the intake manifold area.
Can someone tell me where the smallest of 3 fittings leads on the driver's end of the cylinder head? It's close to a temp sensor I believe and...
I learned this lesson the hard way. The car had been driven past a broken head gasket so that occasionally, coolant would migrate into the number...
If one cylinder holds a fluid longer than the other three, it could have a bent connecting rod. This will also show up as higher compression...
After getting all four pistons to the midpoint of cylinder travel, I put a given amount of gas in each. I think it was 500 ml but don't recall for...
That is definitely something to think about. I hear there is a clamp removal tool that makes it much easier.
I was able to get the Internal Combustion Engine completely removed and the replacement completely installed from the top and without removing the...
The paint pen markings were inside the valve cover on one of the camshafts. There were also similar paint pen markings on the outside of the...
Not sure on how much mileage they have. I'm planning to flip the car but I don't like the idea of selling something that will barely male it...
car-part has the motor for 350 near me and they have a 90 day guarantee while the yard i got this one from has 1 year. but, i pulled 3 motors...
engine cost was 100 bucks, which i think is a good price. i checked cylinders 3 and 4 with pistons at the mid stroke point and they held a good...
I'm putting a Gen 2 back together after buying it at auction. I found a junkyard motor for it. This motor had a number plate on it that matched...
