Separate names with a comma.
https://photos.app.goo.gl/6PyDKP9dMibKP23z8 If I did this correctly, you can see the top of the old head gasket here which I believe is the...
The other thing nagging at me is a spec of 30 to 60 rA for average roughness of the cylinder head deck. Felpro also to me smoother is better for...
I called Felpro which made the head gasket kit and the bolts. They had a spec for bolt length min and max for new bolts and max length for...
I also thought of pressure testing the cooling system on the theory that this might inject coolant into the problem area or areas, although this...
:( while the Prius seems to run well and does not smoke, it does have the dreaded white foam under the oil cap and I think it is losing coolant....
I have taken the Prius on a long drive...maybe 30 miles, city and freeway. It runs great with no trouble codes, although it does say "maintenance...
Yeah, you're probably right. If anyone has the energy to do that, that would be good as well. I will put any other stuff in that thread.
The Prius started right up with no clattering or noise from the timing chain. It does have a trouble light which I'm guessing was stored in the...
Thanks for the feedback!! I do have the egr coolant line figured out. Have not put the wipers back on yet so I missed the wiper motor connector...
I found the hose connections at the EGR assembly down tube and the water pump. The wire bundle actually has nothing to do with coolant but it...
I have finally finished the head gasket but have two items left unconnected. One is electrical wiring about 3 feet long with a plastic plug on...
I went to the junk yard and got the bolt from a Scion XD which shares the 2ZR motor. A Pontiac Vibe was there as well but it's motor was gone. The...
I had improperly torqued the new head bolts in that I did not apply the light oil coat on threads before installation. I talked with the felpro...
I'd agree that not just any bolt that fits will work. The one I got is stamped 10.9 on the head which is a metric equivalent to Grade 8, which are...
Just when I thougbt the difficulties were done!!!! I was torqueing the camshaft bolts. I used 12 ft lbs for the 10mm black ones and 20 ft lbs for...
I have done multiple crankshaft rotations and i dont think the chain has enough slack to jump. I'm not understanding where you recommend pressing...
I see it as more of a design problem. Maybe it's not enough to damage anything. But, if a stiffer spring was used, it could be compressed with a...
I know this is an old thread but thought I'd share my idea here. If the leak is in a limited area of the timimg cover/engine block seal, id...
P.S. I can also see that the small hook has sprung open toward the timing chain cover. When tight, the top segment of the chain rubs against the...
