Separate names with a comma.
yeah, I did the same thing. that 100 amp fuse is bolted in. it's not easy but with a lot of patience it can be done. it's just a real pain.
The fuel pump does not operate unless the engine is turning around. Just turning the key to the on position does not turn on the fuel pump....
my monitor went black on one of my seven priuses. When I press the info button nothing happens. because I am very familiar with my audio presets,...
This is what P0AE0 means. It happened to me. I rebuilt my '07 Prius battery and then messed up and put a bolt in a hole in the drivers side...
You replaced the axle hub? On the Prius with only 32,000 miles on it? Which one? Let me guess, back right? You could take the HV battery apart...
so.... is your car a gen1 prius or a Honda insight?
Take a wrench (3/4" I believe) and put it on the Harmonic Balancer pulley bolt (passenger side) and see if you can turn the engine around. If you...
If you are able unplug the connectors on the HV battery (in the trunk left side) check for any corrosion, clean all four sides of each pin with a...
I see that yours were copper. you got them nice and shiny. good work
yes, that corrosion is causing your cells not to fully charge and function correctly. I would definitely remove all the rectangular connectors...
Take the HV battery apart and clean the terminals. Get those connections shinning. Your other problems may go away. Again, I would addres the HV...
Did you get an insurance settlement on that car yet?
you have seven priuses or seven catalytic converters?
Put your hand on the inverter pump and feel if it is vibrating. Did your engine ever shut off when you drove the car to the store. If it did not,...
Put a 3/4inch (same as 19mm) boxed end wrench on the engine crankshaft pulley bolt and try to turn over the engine manually. If it wont turn over...
I also get a P0171 at about 35 mph. But I'm not getting 50 mpg. I don't think that error code is going keep your car from running. Mine has been...
That's what mine looked like also. I just scraped that brown scale off and put injector cleaner in the inline fuel filter I installed. Keep in...