Separate names with a comma.
So, I found a problem too where the oil drain plug was leaking with the last oil change. I thought i torqued it right, but it backed out a little...
I pu hi I did replace them when I did the head. They seemed to be in place but I have concerns now. For example one tore when I put the valves in...
Mhmm. 192k miles. It could be pistons and I’m concerned, however I strongly suspect the HG job was the trigger for the oil consumption. I was able...
changed my headgasket earlier this year 15k miles ago. I’ve been having oil consumption and began getting a P0304 at high acceleration. I pulled...
Auxbeam s3 H11s ordered. When I have some money I’ll replace the 9005s and other bulbs on the exterior. Thanks for the tips everyone. I got the...
Interesting. I might look into it. What bulbs did you use? I know there's a lot of cheap junk out there, much more likely to perform poorly and...
See I'd love to do that, but first my understanding is it wouldn't be legal here in the US for a street vehicle. Have you had issues with police...
so my 2010 blew out yet another bulb (the passenger side always fails first) at less than 1 year. Wondering if I'm doing something wrong, i...
Following Mendel’s advice and not worrying about covering the inverter. Also plastic is an insulator and I wonder if it adds a couple degrees temp...
Thanks I’ll consider what you’re saying strongly. Also it’s a couple hundred to add the covers. Maybe I’ll polish the inverter carefully and lightly.
Oh my, didn't know this existed, going to look now. Thanks! Edit: Just found a reddit with part numbers. So the covers are from the ct200h?...
I wish I could paint my inverter to match.
I decided to add a little gentle color to my engine compartment. I painted the engine cover a light metallic blue. The paint is engine paint so it...
Amazing the tiny difference that causes so many failures. Cost cutting or poor quality control on the part of the aftermarket supplier I wonder? I...
My ABS light came on, and after scanning I found out it's a C0205, the front left wheel speed sensor circuit failed. I looked at turns out one of...
Very well done schematic and presentation especially the safety information. I might build one of these, though I don't know if it's worth it or...
Thank you. I’ve thought about that, my concern is how much lubrication has it lost so far? It’s a pinhole and hard to tell how much quantity it’s...
Ok so I checked online and called the dealership. There’s only a boot kit for the driver’s side listed and inner passenger side solo boot. There...
Thank you! I think I can take this job on. Definitely much easier than my head gasket was. I’m curious about the spider, I’m wondering why can’t...
