Separate names with a comma.
Monday night I had everything down to the head, but the parts and a couple tools including the double hex bit, didn't arrive yet. Unfortunately...
That's good to know about the ultra black. I'll let it sit 24 hours. Does the Permatex The Right Stuff work on the head or should i stick to ultra...
I checked the depth. Cyls 1 and 4 are at equal height, as are 2 and 3. Should be safe to proceed with the HG repair as soon as the parts come in,...
Oh, I will add that my car is in the garage, not moving anywhere until the parts come in and I finish the job.
i'm gonna have hope that mine isn't too far gone. the rattling is recent, and I haven't lost much coolant, so much that I haven't noticed any loss...
That makes sense. Will do that tomorrow before I take anything apart. I found this bit of advice and wonder if you think this is a good method, it...
Update: Got ahold of a simple scope, but just pulling the plugs, I saw no 2 cylinder's had a white tip. Additionally, looked like there was steam...
Thank you for that answer. I'm going to check the gasket for sure, and I guess look into what else could be happening if it comes back ok. It's a...
Hmm, saw a borescope on clearance at Advance auto so I went ahead and bought it. Going to pick it up and then look in my cylinders.
170+ and 7 years.
Considering it. How do I find someone to take it to with a scope? I also have a few things I'm wondering: 1. Does a failing head gasket usually...
During startup, my engine is misfiring, and it's getting worse, up to a minute last night and it through P0300, 301, 302, and 303, the misfire...
So funny story, I replaced those a month ago. I’ll check them and make sure they’re tight.
I've started noticing a clunking sound when I'm steering any amount while driving over small bumps. I'm curious if this might be the tie rod ends,...
Thanks! So I checked and when I click to add to the cart it gives me several part selections (toyota OEM, Daihatsu, and AISIN). The AISIN part is...
I have a 2010 with over 170k miles. I'm going to save up to replace the water pump, as a preventive measure, since it seems higher mileage it has...
Good to know! Yeah I observed those things when I took it apart. I did not see any physical damage on the EGR valve including on the actuator side...
I've had it since about 120K, so I don't know if the previous owner had the EGR cleaned, but I'm going to bet it wasn't done. Sometimes the engine...
171 K.
I just did a cleaning on my EGR valve/cooler and intake manifold (and planning to install an oil catch can). I was getting an intermittent P0401....
