Separate names with a comma.
What I'm trying to do is to turn on the blower during grid charging while both the hybrid battery safety plug and the 12V auxiliary battery are...
Thank you @ChapmanF again for your reply. I didn't make myself clear. When supplying power and measuring voltage, I disconnected the blower motor....
Thank you very much @ChapmanF for the information. Do you mean Prius C has the same pinout as gen 2? The fan in Prius C has the same type of...
Something interesting. When I supply a 12V DC to the fan connecter (+12V @IG0, ground @GND0 & SI0), I detected a 6.8V @VM0. Is this expected? I...
Does anyone know what the wiring diagram is for Prius C? I followed the information in this thread on my Prius and it works. However, when I tried...
Have you figured it out? Is the Prius C fan pinout the same as Prius'?
True. However, in hybrid battery discharge process, the filament resistance decrease is a result of battery voltage drop. As a net result, the...
You made me feel better.:)
When to change ATF is a heavily debated topic, e.g., ATF fluid changes ARE Required. | PriusChat
Thanks. That's what I am doing now.
I'm in the process of reconditioning my traction battery, and already massed up the first discharge. Forgetting to change light bulbs at 196V and...
Depending on what you think "IMPORTANT" is. From the point of view of Prius operation, the voltage differences among the blocks of the battery...
My car reported a P0A80 about 2 weeks ago. I parked the car in garage for a day, then measured the voltage. The strongest block showed 15.68V, and...
It looks like one of the parameters used to trigger a P0A80 is the Delta SOC. But how does the computer know the SOC of each block? As I see it,...
Another question: do you need to turn on the traction battery fan during discharge, assume the light bulbs are located away from the battery and...
@Abarnabe Care to elaborate what's not right in @A.J's statement?
Do you use a Mean Well LED driver for Prius C? If so, which model?
Definitely I'd like to leave the battery in the car for the reconditioning. I have the impression that pausing in NiMH battery reconditioning is...
Somewhat confused with the data displayed on your discharger. At 169V and 0.285A, the effective resistance is 593 ohms. Assume you use 360W light...
Did you mean the whole pack was discharged to such low a voltage? What discharger did you use? How hard is it to manage the discharging without...
