Separate names with a comma.
No clamps, just held on by just friction. Just make sure that the new one is connected the same.
BTW, you can replace the pump from up top alone but way easier if you remove the plastic shield in the passenger side wheel well.
Just FYI, I just replaced my water pump this morning too after having to limp home and end up w/ P261B and P261C code. Amazon has the cheapest...
It's the check valve, part no 85321-28020. It's under the hood liner. My original symptom was weak passenger side spray. Cleaned the nozzle...
I bought a set of beamtech brand from Amazon about a year ago. I switched from HID after a couple of years of use. The cutoff line on the LED...
No need for resistor. Its plug and play.
just don't touch them after usage. The heatsink is super hot.
I bought this to maintain the charge on my riding mower for $16. It's similar to battery tender. [MEDIA] I installed the ring terminals on the...
I have 25% code for Advance Auto, APV7BX, that will bring AGM battery down to $150 in case you don't have a pep boys nearby. Here's the link...
Sil-Glyde is the best. Pick it up along w/ this brake grease from advance auto, Advance Auto Parts - Down for Maintenance Also throw in their...
I went with Wagner for both front & rear too. Make sure you order some lube for the brake pin and pad grease
I did the same thing about 6 months ago. cut off line is cleaner than HID.
you can have mine if you're willing to pay for shipping. Im in Austin, TX
I agreed with Sil-glyde for the slide pins. I used CRC silaramic brake grease for the backing, Advance Auto Parts - Down for Maintenance.
I did all four pads only at about 140k. Figure I do all of them anyway since i already had the battery disconnected, as Ray mentioned above. One...
Check out RockAuto or ebay. Got mine for like $25/each. I would replace both as a pair. Pretty easy to swap out.
No issue so far since october.
Resistor? I thought that was only needed for turn signal. This is just plug n play.
I just got this late last year. Nice clean cutoff [MEDIA] No noisy fan to fail. just don't touch the heatsink after u had it running. Had one...
Yes, curt hitch. Installed pretty easy. I used for bike racks.
