Separate names with a comma.
im not sure but, i would be careful with HID fogs, the temperature of the bulb may cause the glass to crack. I also saw PIAA LED 9006 bulbs that...
when was the last time you checked your brake fluid? also is your 12 volt battery good? also do you hear the pump run when you step on the brake a...
these headlights are mostly good for the housing, my guess is its a fresnel lens, so retrofitting TSX or S2000 projectors would be one of the best.
Ending today, make your picks. this is the best deal in my opinion on 30 modules.
I think you need to take the car on a long drive with cruise control. I used to take my Prius on short trips, and noticed my battery always stayed...
it sounds like traction control activated. either that or your emergency brake is stuck, also that shakign back and forth happens when my e-brake...
bump
if you have a salvage title you have no warranty what so ever. I went to the dealer once just to see and they basically brushed me off ( I have...
Usually when the HV battery is going bad youll notice a loss of power. For me on my 2001 prius the engine would rev really high and top speed felt...
make sure u have all the receipts for all parts purchased. im not sure about NY but in FL you need pictures of before and after and a insurance...
are u mechanically inclined and comfortable with working with HV magruder? from what it sounds like, although some may not agree it sounds like...
the snorkel doesnt do much, my car is salvage i run it without the snorkel i guess it properly mixes the air from inside the engine compartment...
heres what i suggest, if theres no triangle then theres no problem, continue driving normally. From my experience i can say that if there is a...
In my opinion if you purchase another 01 prius battery from the dealer it would still have the same problem down the road. I just recently swapped...
the revving thing in your original post has me concerned its the HV battery, on my 01 prius the battery would show full and all of a sudden drop...
i was thinking of clamping the top of the case on two clamps and cutting straight down the middle with a reciprocating saw.
i think im gonna cut the cover lengthwise and add filler material to widen it maybe a half inch. OR retrofit the gen 2 case on the 01 prius case.
The ND-11 is hard to find, even for me, maybe now in 09 its a lot easier. Pull a vacuum for 10 minutes at least to remove the moisture. And check...
On sale on ebay 2001-2003 30 Prius Battery Modules:eBay Motors (item 230387340585 end time Oct-18-09 17:14:16 PDT) All the voltages are above 7.6...
I dont think it would work if i used two 2g covers, reason is based on that big hole for the vent fan, i would have to fabricate that which = more...
