Separate names with a comma.
The SGII is like any other generic scan tool that only scan for emission-related codes; i.e. mode $03. For all DTCs including emission-related...
Did you set up the Snapshot function? This function allows you to record for 5 sec. up to 60 min. and then prompt to save to a file. You can then...
Hi B2FiNiTY, Yes, it is stated on your Owner's manual. [ATTACH] Vincent
Hi Mikey The Mailman, I also use Trip meter B to track lifetime FE. It too rolled over at 9999.9 km. I 've not noticed any changes in the...
TS requires SAE J2534 compliance devices and ELM327 is not. Vincent
Hi boppo, You need to edit the IT3System.ini in Program Files\Toyota Diagnostics\Techstream\Env Change TISFunction=1 to 0 Do make sure you...
You can use the Data List Manager to build your own custom list, just select those you want to monitor. Vincent
AFAIK, there are 2 versions of Mini VCI; firmware ver. 2.0.1 and 1.4.1. I got the former 2 yrs ago which has support for K and L and the latter...
Hi PriusWI, The wires may look OK but you should use a multimeter to test for open/short. Be sure to check the connectors too, I had a P3030...
Hi Denny63, It could be your buddy never pressed the Park button before shutting off. Prius C Trip Summary Screen ?? | PriusChat Vincent
w2co did ohm out the SGII cable in this thread. Pin 4 & 5 are tied together. Vincent
There is 1 PID "Requested Engine Torque" which I believe is the requested engine power because the unit is in kW. I think what you want is the...
Hi moofur, From the observations of my C, the MFD does show big variances (usually better) FE after I reset the trip meter for the 1st 200 km or...
That is correct. I like this security feature. Let's say if my intention is to lock the doors but accidentally pressed the Unlock button in a...
It is a customized setting and can be changed by your dealer. The default setting is 60 secs. and can be changed to 30 or 120 secs. There is...
The sun gear is connected to the ring gear thru' pinion gear of the carrier. When ring gear rotates, the pinion gear also rotates so does the sun...
Let's look at the Nomograph: [ATTACH] When the vehicle is stopped, all components at 0 rpm and 0 torque. When vehicle starting off, only MG2...
There is no magic or imagined theory. It is not easy to understand how can two mass; MG1 & MG2 rotating at high speed and the ICE kept still. Pls...
The torque come from MG2 and not generate by MG1 itself, there is a difference. Vincent
The ICE is not kept stationary by friction. It is stationary because there is no "pivot" for it to turn. MG1 has to act as the "pivot" by exerting...
