Separate names with a comma.
Does your Gen 2 Prius have the smart key system? There are two different battery sizes. A smaller battery if the car does not have the smart key,...
I replaced the front left fender liner in August 2024 with a generic one bought on Amazon for $28. It took a while to install correctly, but it...
It explains a lot, but it does not explain what is causing the misfires in your car's engine. You or your mechanic needs to diagnose what is...
What are the INF codes (sub-codes) that you have with the P0AA6 code?
Is this Dr Prius data taken after or before you did the grid charging and discharging cycles? Besides blocks #2 and #14 being bad, blocks #9 and...
I am glad to hear that your mechanic found the problem. Most mechanics would not have found that it was the exhaust heat recovery system that was...
Take a look at this thread, https://priuschat.com/index.php?posts/3360511 How many miles on the car?
No
What do you mean by "the freeze frame at 26A"? Do you mean the Dr Prius app data? That is not the freeze frame data. You need to look at the...
Did you buy a new or used part?
The freeze frame data for the P0A80 code will show the voltages of all 14 battery blocks when the code was triggered. Using that information,...
I just read your post again. The problem was not the orange safety interlock plug since your car went to Ready and the engine started. Sorry for...
Yes, those are the three steps. When you do the last step, make sure you slide the lever with force.
Odds are that you did not install the orange safety interlock plug correctly. There are three steps to install the plug correctly.
Which water pump did you replace? The engine water pump or inverter water pump?
That confirms that there is a bad connection between the 12v battery and the front fuse box. It could be the negative or positive connections.
So the car has a bad negative connection between the 12v battery and chassis ground OR the positive connection from the 12v battery to the front...
You do not need to start the car to turn on the headlights.
You passed the first test. Now, turn on the headlights and measure the battery.
How hard is it to connect a volt meter to the 12v battery and take a measurement? Like they say, you can lead a horse to water, but you can not...