Separate names with a comma.
Clipped from post 14: My car is in perfect condition :eek: Tom, we've all read about how you repair stuff, so this statement can't actually be...
I've recently shown that a failing brake actuator (cycling every 7-10 seconds) can create a massive drop in fuel economy, even if it doesn't...
Pretty generous offer. Hopefully someone is able to use them. Fortunately, I've never run into a Gen 2 HID model with any headlight problems other...
The blinking fuel gauge is most likely just due to you disconnecting the 12v battery. It will always 'wake up' as one blinking dot until the fuel...
and all the cells measured up to around 6-7 volts If this is true, then your 'new' battery is dead as a door nail. I've replaced HV batteries in...
It could suck if Toyo charges you $175 to do a diagnostic just to tell you your gas cap was loose. Any chance of just running by a NAPA or...
I'll take an OEM junkyard one, paint it purple and put a 'people eater' decal on it. Sell it to you for only $75. Ahh, just joking around. Go for it.
You had no other codes than the P0A80? No "fail to start" or "low engine power" or similar codes? It really sounds like you may have had/are...
Don't confuse "equal" voltage readings as being a 'balanced' battery. "Balanced" is referring more to individual module capacity. Think of it...
Also, it is highly unlikely the battery is actually at a zero SOC. It's much more likely to be a false indication, either due torque settigns, the...
Return trip was a slightly different route today due to having a side errand (no highway miles). Even more confident the MPG increase isn't just a...
@Rick O I'll just assume from your OP that you have an engineering background. There's no need to overcomplicate what you have going on. The...
Just wanted to get this into the information base. I purchased a 2008 over a year ago that had the dreaded brake actuator problem where it would...
This is certainly something to think about. I've never had to mess with the rears, even on high mile Gen 2s. If the thread/through hole is...
I replaced mine with Timken, but Moog has a very good rep also. If the job were being done at a shop like PepBoys or something, they would likely...
The 4 bolts that get removed from the back of the knuckle fasten the hub to the knuckle. The knuckle has a "through hole" with no threads. The hub...
These can be taken out in two minutes. It's all technique. Assuming you are replacing the hub assembly, not JUST the bearing, because the assembly...
The wheels spin faster because the car is trying to run away from that steering wheel.....
@AzusaPrius is a resident expert on that battery pack. Since he's being tagged, hopefully he'll be along shortly to provide some technical help.
What a shame. Sounds like they didn't fix the problem. I did 2 of these jobs recently, one a couple weeks ago on a black 2008 and one this...
