Separate names with a comma.
You might consider using Refrigeration Technologies RT200R Nylog- Gasket/Thread Sealant. [MEDIA]
This is 3M Plastic and Emblem Adhesive, 08061 made especially for the purpose.. [MEDIA]
It's the R600 refrigerant that is highly flammable now used in many small refrigerators....
You don't know what to believe on False News.
The internal filter is basically the same as the cartridge element. Using the cheap cutoff tool that I got off Amazon, it takes no time to cut...
That filter came out in 6 months and only after 1,200 miles. If one wants to keep his or her car for a long time, 3,000 to 5,000 miles is the...
Toyota Part Number 90915-YZZN1, the same spin on filter used on later Gen 4 models and many other current Toyota models.
I changed the oil in my car, today. Usually, I just put the oil filter into the bin at my recycling center. This time, I cut it open and...
After viewing many of those who have posted here, it is readily apparent that the general populace has been conditioned to enter in relationships...
Brake alignment? In your area, the only thing I can think of is cleaning and greasing the caliper slider pins to make sure that the pads wear...
The names Camry and Crown, as I recall, means the same thing. Originally, the Crown was called the Corona in the US. So, Toyota is just melding...
I would check the charcoal canister and the evap system including the evap valve.
Cork is not ideal, but is is quick and easy to replace, if it has to be done again. Not so, with the goop. I've replaced oil pan gaskets on...
It's the "goop" or FIP (form in place) gasket material that Toyota uses at the factor. Improperly applied, it fills the screw holes. FelPro...
The initial install of the oil pan has to be either a rookie or lack of attention to detail mistake that is unacceptable quality control. I would...
The timing chain does not actually "stretch" much at all. The metal components that makes up the chain is not vert ductile and will not actually...
Oil pan bolts have 10mm hex heads. The actual threads are M6x1.0.
The Prius v catalytic converter is a little different than that of the regular Prius although it is still a Gen 3. I have attached a photo of the...
I wouldn't bother with trying to place jack stands with the factory supplied scissors jack. It is absolutely too dangerous to raise more than one...
[MEDIA] It's a long video. but I found it really interesting.
