Separate names with a comma.
If you live in the rust belt I guess this could be problematic. Down here in the southeast I've done about 12 of these things and about 45...
If you have a Gen 3 that you're replacing then I would think you have all your hoses in place as a Gen 3 and then with the Gen 4 motor set in...
You You should do the down and dirty test from the service plug to ground and see if you count down to zero in DC volts on your test meter see if...
I have to look on Rick Hendrick's site to see I'm sure they've gone up no question about it and right now I've had such good luck with this guy up...
Next thing I would do is be pulling the plugs in the morning and looking for any kind of moisture or anything I can see fine droplets on the plug...
Depending upon how much of what parts you're using I would think so It's all 1Z so in theory yes I don't have the swap but Toyota swamps are...
You got to click on the snowflake and that brings up all the parameters of what's happening with that code like number two cylinder misfire number...
So the HV battery doesn't really have much to do with the fuel pump The way I check the fuel pump on the generation 2 without going to do a whole...
And the cord for that base and that bulb runs around back of the plastic housing and plugs onto a white main board holder and I don't see any...
So I'm standing out here at the 08 with the shifter box sitting in my hand it's black The only ball I see is in the gray housing that has the...
You're going to have that piece of the chassis in your hand so I mean really you have everything in your hand that you can twist and take out and...
Is the fan running in the back of the car pretty much anytime you're driving the car pull up at a stoplight and hear this fan running in the back...
Never heard of a tech to prep the battery for return That's a bunch of crap I've never heard of. When I bring my battery to Rick Hendrick Toyota...
He must have been changing the HIDs because the halogens pop in even with big hands and not looking The HIDs on the other hand are a little more...
You have to do physical cleaning one or two of the tubes you can push gun cleaning type brushes through and all of that The cooler may be so...
I don't know I have that same pipe on two generation 3s that are here blown up so rattling and shaking and jumping around all over the place in...
I'll send a pic in AM
Well try it . They're small. I just take em out .
I guess you're doing hid ?
Many times in other Toyota's it will be in buttons like the air conditioning button that turns blue or green it doesn't really matter those bulbs...
