Separate names with a comma.
Hi gliderman, It is under development here or here. Vincent
Hi lennonqpublic, There are 3 battery packs in the PIP; main, sub1 & sub2. In EV mode, sub1 or sub2 is used. In HV mode, main is used. Each...
I had the sense wires problem reported here. IMHO, it is safer to dismantle the sense wires harness from the terminals and unplug it from the...
Is this the same function as this procedures without using SGII? Vincent
Hi Adrian, I think there are some errors in the spreadsheet. It seems that you used the trial value of divide by 8 for Battery Block Voltage. The...
Hi JJLINK, Actually, there is nothing wrong with the SG cable. Many of the other multi-protocol scanners, e.g. AutoEnginuity, also has the same...
I believe this etf is for the engine water temperature sensor for the exhaust heat recirculation system, TWS3. The other coolant temperature fWT...
XGauge a.k.a. Add-A-Gauge is a feature that let you customize your SGII by adding additional vehicle specific digital gauges. It came with SGII...
Besides Techstream, you can also try ScangaugeII with Xguage. I 've verified the INF codes are the same being read by Techstream. Any way for you...
I don't think it is related. I've seen offset of -50 and other values. The value of the offset will determine what the minimum value it wants to...
Hi F8L, What is your SGII firmware version? If it is 4.0x and higher, you can try these Xgauges. Vincent
That would be 40ºC too high.:confused: The MTH in ºF is 00090005FFD8. Let x = value read by SGII, so the equation is: F = 9 / 5 * x - 40 But...
You can find it in the google spreasheet. Name|ShortName|ModeAndPID|Equation|Min Value|Max Value|Units|Header Request Regenerative Brake...
http://priuschat.com/forums/generation-1-prius-discussion/82763-there-way-find-date-prius-hybrid-battery-manufactured-4.html#post1169559...
Regenerative brake request torque. Regenerative brake execution torque. If HV ECU cannot supply the requested torque, the balance must be made...
It is the other way round. They are related but I'm not sure you can add them directly this way. Here is a quote from the NCF. The brake force...
I believe modules replacement and cleaning most likely would solve his problem but my question is whether the terminals are leaking KOH. The...
Hi tnt01prius, Yes, module 12 & 24 are more than 1.2V difference than the lowest voltage 7.95V. There are 6 cells in a module so one of the cells...
With the addition of SRU, the speed relationship for MG1, MG2 and Engine has to be updated. Equation 1: ws = ( 1 + R ) * wc - R * wr where...
Hi xs650, The sensor, TWS3, is actually for monitoring the engine coolant temperature for the exhaust heat recirculation system. There is another...
