Separate names with a comma.
Hi bobofky, I believe your NHW11's manual cannot be used for NHW10. The OP has a 1998 Prius so must be NHW10. Hi Jez, I think you can find most...
If there were DTC(s) present, the ABS Warning Light on the combination meter will have a blinking pattern for the code(s). Here is an e.g. of...
I read from CleanMPG that there is a trial version, 3.18f, that can handle the flow control frame. Possible Gen 3 Prius codes for ScanGauge -...
OK, I also recorded the DTC with TS Lite. The INF codes were exactly the same except the numberings. So, it is really possible for SGII to read...
AFAIK, the ABS ECU is communicating at 9600 baud and there is no option for scangauge to be configured to operate at that baud rate. Unless there...
Hi pat883, I 've checked the Repair Manual and it seems there is no such code P3150. Perhaps it was P3105? Anyway, the other 2 codes P1636 and...
have you removed the Left End Plate? [IMG] The modules are also hold down by the Battery Clamp Restraining Rod. [IMG] You can download the...
Yes, replacement parts are difficult to get since our local dealer sold not more than 20 units and it is already more than 9 years since they...
Nope, since the highest and lowest voltage were 7.64V & 7.58V respectively, I did not think the difference of 0.06V was that significant.My only...
The same Master Warning Light returned after about a year later. I post all the details in this thread:...
About a year ago, I had the Master Warning Light came on as reported in this thread:...
I 've already tried the brute force search method some time back, it only found 16 & D5 for me. So, I think you will only find those 3 addresses....
I've read that you've solved your problem. Thanks for sharing! To answer your question and others who like to know, yes, you should be able to...
Sorry, I've not checked back for a while. The character should be a dash or hyphen. The txt files were exported from Excel as CSV (Comma...
Here are revision 3: ECM ($10 - for North America and EU only) MIL illumination - new No. of Engine DTCs - new Fuel system status #1 - new...
What a bummer! It looks like they sold me a pirated copy of Techstream-Lite. The option to register the software and updates are being gray out....
I have ScangaugeII but it lacks the ability to do data logging. So far, I only manage to read some data from HV ECU and Bty ECU, the rest of the...
Thanks:) If it shows blank, pls check that MG1 or MG2 RPM is not selected at the same time. Here are the Xgauges based on Graham's scaling:...
I 've tested MG1 & MG2 Torque. It seems SG2 can't divide a negative no. correctly. When the torque is -ve, I'm seeing a very large no.:confused:...
Thank you so much! I knew there are bound to be errors since my calculations are based on observations. Looking at your annotations on WOUT/WIN...
