Separate names with a comma.
That doesn't sound like you. Make it 500,000. :)
Did the dealer check the insulation resistance between the six terminals of the three–phase alternating current cables on the transaxle side and...
OK that confirms it being brake rubbing. Yes but it still doesn't have to be rubbing without applying the brake though. Maybe it needs some...
Rubber, stuck on the wood with double sided foam tape (the tape is not visible on the pictures). :)
Yes it was mentioned before on PriusChat. I downloaded them all but haven't read even 1/10th of them yet. :p
Thanks for sharing and definitely encourage your friend to demand pay for the diagnostic work.
I had some dealer service records disappearing from the Toyota owner web site some time ago. I called Toyota and the person on the phone said...
AutoEnginuity is good for diagnosing problems (reading trouble codes) but so so in data logging (can only talk to one ECU at a time). PriiDash is...
In this post http://priuschat.com/forums/gen-ii-prius-fuel-economy/14675-most-efficient-speed-best-mpg-4.html#post385271 you will find a graph of...
If you can hear it while driving then I would say definitely get it fixed. Have you been keeping records of MPG?
Had another S1 skip this morning. ICE started up and went directly to S4 idle check. Really wish it would happen every morning but still no clue...
I am not battery expert but wouldn't it much easier to detect weak modules by testing the battery under load (which was what usbseawolf2000 did)?
You can try Torque for Android devices or my PriiDash for laptops. Good luck! :)
Try your local junk yard or autobeyours.com Good luck! :)
Here is what I do: (following Patrick's advice) Jack under the square rail weld: [IMG] Jack stands under the Toyota jack points: [IMG] [IMG]...
That's exactly what I do if you take a look at the pictures I posted above. Good luck! :)
Here is what I do with my gen 2: Jack: [IMG] Jack stand: [IMG] [IMG] And I stick my home made wood ramp under the car for extra safety if I...
Here is a good picture to describe what I do: [IMG] except I put the jack a little bit further back than in the picture, under the welded "cross"....
If you really keep the HV battery current null during glide then you will find the battery SOC filled up gradually since pulsing and braking both...
This document "Stereo Accessory Installation Guide" by Chris Dragon may help. Good luck! [IMG]...
