Separate names with a comma.
I did my DIY version similar to this: Cruise Another Japanese version but without the CANCEL switch: Æ’vÆ’Å Æ’EÆ’X_¬•¨ The new...
The dilution is suggested by Toyota for dismantling a Gen2 HV Bty.
I've removed the Bty ECU numerous time when I was troubleshooting my problem back in Feb. You don't have to take the frame apart, you just need to...
You can subscribe to https://techinfo.toyota.com. Hobbit has a copy on his website:...
Hi That_Prius_Car, That brochure is for NHW11 and not NHW10. I've a clearer image that shows the model as ZA-NHW11-AEEEB (S) and ZA-NHW11-AEEGB...
Here are the Xgauge alternatives to CMNDS: XGauge|TXD|RXF|RXD|MTH|NAME|Notes HV DTC 1 (emission & non-emission...
Hi Bob, Yes, CMNDS can be used but the filtering is not good. Sometimes you don't get the correct responses and you have to keep sending until...
I managed to get the SGII to display DTCs: [IMG] MORE=>MORE=>CMNDS CMNDS|Response 8316F113FF00|87F1165315203140000087 CMNDS 83...
07EA is a response from 07E2 (Hybrid Vehicle ECU). 07E8 is a response from 07E0 (Engine Control Module). 07EB is a response from 07E3 (HV...
I stand corrected. You're right that 07E0XXXX codes don't work in CMDS. SGII will automatically append 0x07DF and the length byte to the front and...
Thanks for trying! What I'm trying to find out is whether the physical addressing work (07E0 is for ECM). The other addressing mode is for...
Yes, here are the precautions: • Electrically insulated gloves (rated for 1000 volts) must be worn. • Ensure that the bus bar modules are...
Hi Ivan, You are not alone, I've the same problem on my Gen1.:mad: It seems that different regions have different OBD standard supported, I...
I think it has to do with response time. If the bus is not in 'sleep' mode, you can get response quicker after you sent a request. Otherwise, you...
Hi Bob, I did not find any documentation on SG regarding 'heart beat'. I 've read it from Elm Electronics:...
Hi Bob, This happens with off-line editing and I believe it is due to the lack of keep alive signals. There is no problem if you connect...
Hi Bob, As far as I know, only the HV ECU store subcodes. If there is problem in the inverter, the HV ECU may log the subcodes. P3125 is one of...
Hi tochatihu, P3019 refers to Battery Block 9 Malfunction (Battery internal resistance is abnormal). There are 19 blocks of battery; P3011...
According to the RM, INF. Code 123 means HV Battery Malfunction - Input of abnormal signal from battery ECU (HV battery system malfunction)....
Those are supposedly the Infomation Code or subcode. If you got 0, that means no subcode has been logged. You don't have to keep monitoring these,...
