Separate names with a comma.
Hi craigey, Thanks for the pics! OMG, the brake pad almost wear down to the metals. Fortunately, you discover it now. Good tyres are just as...
Hi craigey, How about the rear brakes? Did you take pictures of the brake pads & rotor? If the inner brake pads and outer brake pads wear...
Hi craigey, My rear brake pads lasted 117k km, the stock front brake pads still has plenty of pad left. Your '06 has improved regenerative...
Hi craigey, welcome to PC! I do my own oil change. The recommended viscosity is SAE 5W-30. There are some hypermilers here use thinner oil like...
Hi Bob, I 've thought about that too but the SGII cable doesn't use pin 13 which means I can't modify at the RJ45 end, it has to be at the J1962...
Hi Tom, I've no experience either. Looking back at post #30, TexomaEV can read out 3006 & 3021 so I believe it is not limited to CAN bus....
OK, I made a custom adapter since only pin 1,6,7 & 8 are all that is needed. I've also added a 9V battery connector to supply power for offline...
Thanks Tom, no hurry. I meant to attach the pinout for your reference in case you need it. Thanks Bob, your suspicion is logical. I was...
After looking up GEN2 Xgauges, now I understand what both you and rickw are saying. Both Bta and Soc for GEN2 are using the same TXD so can't be...
I 've added btV, MG1 & MG2 RPM to the list. btV is not easy to find. I was expecting a 2 bytes value since a byte can only display 0x00~0xFF or...
That's good news! As long as none of the 4 displayed gauges have the same TXD values, there shouldn't be any problem displaying simultaneously.
Hi rickw, I've not seen my Bta value over 100 in my usual commute, so I scaled it down to -99.9 to 999.9. I wanted the precision of the added...
Hi goldenchild, Did you see any driver inside? There was a report on a 2G robotic Prius in SF 2 yrs ago. [IMG] Robotic Prius takes itself for...
Thanks, it seems there are differences in our 03'. I do not need to unplug the RJ connector at all. After trying out the temp. in °F today, I...
Hi Tom, What is your SGII firmware version? Mine is 3.17, I wonder whether that makes any difference at all? BTW, I've added °F to the list.
Hi merdad, I think it should still be the HV batteries problem. Backup (R) is all electric only, but your HV batteries can't provide power to...
Thanks Andy. Like you, I 've gained a lot of knowledge from many people here, it is only natural to give back.:)
You have non-zero voltages even with the ECU disconnected, that means either the battery modules or the voltage sensing wire connectors have...
It is the other way round. Those showing 0v to battery case are OK, those showing otherwise have leakage to the battery case.
Hi UKCLASSICPRIUS, If you can find Boric Acid in your area, use that to neutralize the KOH between the terminals to the chassis. I can't find...
