Separate names with a comma.
Yes, this seems normal. Six to seven tenths of a volt is not much in reality and those motors actually do draw a bit when engaged. The 14.1 to...
... and of course, the correct cookie cutter text for a P1121 is Coolant Flow Control Valve Position Sensor Circuit Stuck. There are plenty of...
... and the unanswered question is, why? So you have 195's on 3 corners and a 185 on one corner?
Don't do this. If you're going to all the trouble to get to the CM, remove the failed capacitor and replace it with a new one.
Check the three connections at the 12 V battery. The two connections on the battery terminals and the other end of the negative where it connects...
Is the battery installed the correct way up? [ATTACH]
Maybe. It will depend on the quality of the VCI cable you have and whether you can access a seed code. In any case, you will need a seed code so...
I use: [ATTACH] It has become my go-to lubricant.
No, they don't. AFAIK, most other regions do not have it either.
That last instruction should be, "Turn sidelights on and off three times." Although it still works, there is no need to turn on the headlights,...
The repair manual does leave things out that are covered by prior training modules or general concepts a technician trained to the level to be...
You can use just one fob. Remove the mechanical key from the fob and leave the rest of the fob in the slot. Use the mechanical key to lock the...
It's a standard anti-theft (I presume) countermeasure. The default timer is 45 sec if I recall correctly. The timing can be adjusted but there...
The then is implied as in, "I have definitely started and [then] run my gen 1 with the 12-volt battery disconnected, and no complaints."
You're reviving a 14 thread that was subsequently revived 8-years ago? The OP was last seen on PC 3 years ago.
Does nobody proofread their posts anymore?
This is BAD advice. Removing the ECU's ability to detect a P0AA6 does not fix it. Ignorance is not bliss in this case.
Neither. It is really an illusion due to the increased diameter of the wheel. If you are changing to 195 mm width tyres, the correct...
Removing the ability of the battery ECU to detect the P0AA6 does not fix the problem. But, I guess, ignorance is bliss.
... being the Out position? The button disables the SKS, so In is disabled and Out is enabled.
