Separate names with a comma.
Yes that's commonly suggested, although I doubt it would matter that much - as long as there is some opening to allow cool air to go through the...
Yes my experience is also that a small opening makes a big difference in temperature compared to full blocking. See this post for a graph of the...
Wow! Please post more details (in a new thread maybe) when it's up and running. Good luck! :)
Toyota dealers use a special lift to tilt the car forward 45 degrees to drain all the ATF out. I bet you will lose by a long margin even if you...
If you are willing to DIY then vertex's advice quoted above is the best. Good luck! :)
I have learned to listen to Patrick Wong carefully for accurate info. From Toyota repair manual: This matches exactly what he has said earlier....
The problem with any low cost OBD reader is that it only reads a small set of standard DTCs, not the Toyota proprietary, Prius specific codes. So...
Another good salvage source is autobeyours. Just e-mail and ask whether they have it in stock. Good luck! :)
+1. Check to see if the "Key" button somewhere below the steering wheel is not unintentionally pressed in and thus disabling the smart key...
Bingo! See http://priuschat.com/forums/gen-ii-prius-care-maintenance-troubleshooting/81094-battery-smell-solved.html Good luck! :)
Isn't there always a thin film of oil on the surfaces that will never "drain" or dry out no matter how long the engine is stopped?
Data from 2009 Prius: 0.21~0.20 GPH, S3->S4 (during mandatory stop ritual), 10??~99? RPM, standing still, ICE coolant at 166F, OAT 43F More to...
If you were talking about the lower side edges and the "bubbles" are solid beneath then that may just be from the unevenness of the factory...
