Separate names with a comma.
Yes and the diagnostic laptop. :D
Do you have some kind of extended warranty?
I was told that in the good old days a Toyota car (truck?) would come equipped with a set of wrenches. How about that! :D
Is it better to tighten the lug nuts while the tire is still in the air or OK to tighten with the tire on the ground (under load)? Thanks!
There are some rough spots on the wheel due to corrosion. What is the best way to remove them? Sandpaper seems too harsh. Thanks!
Yes if all the oil stays there. When I said risky I was thinking of leaks - more oil to start with will tolerate greater leaks.
When I tried to get quotes for some parts from the dealer they asked for the VIN, saying the 2009 model was "split year" production so the parts...
If 1.6 is correct then without the 12/32 I may be below half of "add" and "full" marks and that seems a bit risky.
In John1701a's oil change instruction he advised to wet the O-ring of the new oil filter to help seal it well. However the filter I got from the...
I was wondering about that since I had seen your advice in other posts. Last night when the oil was relatively cold the (3 + 12/20) quarts reached...
The Shell synthetic oil bottles I bought came with a translucent strip and 4/32 qt marks molded on the side so it is easy to read how much oil is...
Just did the 10K oil change. Used 3 + 12/32 qts. Is it OK to save the remaining 20/32 qt in the already opened bottle for the next oil change in 6...
Where do you buy the parts? Do you have a circuit diagram to share? Thanks!
Just got back from the dealer this morning 2010/4/21. I said to the adviser (looked like a 15 year old by the way) that I would like to meet the...
I recently made a recording of the A/C compressor sound here: http://www.youtube.com/v/dsh3fPJyRo4 Hope it helps. :)
Interesting. So you think the tiny 0.02 degree toe out on the front (well within the 0.1 spec by the way) is the cause of the problem? Maybe...
So ideally one would keep the code plate somewhere safe at home, maybe together with the title of the car.
Sorry to hear the bad news and wish you recover soon. Take care. :)
Is there enough room to drill another hole toward the outside edge of the heat shield and put a screw in? Not sure if it is safe to drill though...
Thanks for sharing the photos. It would be even nicer if the plugs are the same red color as opposed to black. :)
