Separate names with a comma.
open it up, set the fan on medium speed, push the fan with a finger, (or a stick if you are afraid to use your finger) see if it wants to spin...
n they look damn good behind those wheels!
so you have installed a reground cam in your engine? I have wondered about that, and whether the ecu would freakout over it. that does seem like...
I'd hit a junkyard.
you guys rock!!!
I think it was called pimp my ride, they put lava lamps in a vw. and another car had an aquarium in it.
I have found the rear brakes do need to be adjusted occasionally.
sounds like regen isn't working. under normal operation, the front pads only are used under 7mph or during panic stops. any codes that might be...
you need to ditch your lame BF and find a man who can fix it himself instead of letting the dealer hose you. $525??? it shouldn't cost anywhere...
srs connectors on most cars are yellow
imho, the mike ebay users one who shall not be named is fine if you don't lower the car. if your gonna lower it, reinforce the stock brace, or buy...
it seems to me the bar fit better with the markings on it upside down. of course, I can't remember if there even were markings on it...
gonna look very cool when its done. I like the hood a lot, I like the bumper too but I suspect its fiberglass or some hard plastic and I would...
a picture of it parked in front of a yurt would be awesome for the contrast.
your English is good enough, and your pictures speak 1000 words. keep em comin!
the panel doesn't go under the oil pan. it does partially block the oil filter. there is also a short, separate panel under the bumper ; it looks...
get some rubbing compound and a lint free cloth and hand rub the scuffs. machine buffing is quicker but you could wear through the clearcoat. I...
that's an impressive repair. I hope I never need to do it, but if I do, thanks in advance.
the stock airbox necks down smaller than the throttle blade diameter. if you can find a 2" (55mm) diameter maf housing on another car which uses...
