Separate names with a comma.
Speaking of 2004 Prius, the brake warning on the dash means applying the parking brake or low level of the brake fluid. I believe the 2001 Prius...
I'm living in Japan and can help you. However, if you need Toyota genuine parts, your local dealer should help you. If you have a specific...
It'll be called the 2010 model. The 2009 model will be delivered in September this year. http://www.donlen.com/buildstart_toyota.html Ken@Japan
The pin #19 is speed pulse, which is 5V square wave and approx 1,020 Hz at 15 mph. Your chart does not show use of pin #13. Anyway, pin #13 is...
Speaking of Japanese Prius's case... 1) Pin 19 is for speed sensor 2) Pin 1 is power ground (0V) line 3) Pin 7 is IG-ON power line (+12V) Ken@Japan
The EV section of the UK manual was posted on following thread....
Recently, US Dollar value is getting lower and CA Dollar is getting higher. My bet is Toyota is going to adjust the currency conversion rate,...
Please take extreme care about fuel leak using E30 or E50, otherwise you'll see a fire in the engine room. Ken@Japan
Hi Grunthos, Send me PM with your email address. I'll send you the software. Ken@Japan
2009 Initial Order Acceptance: June 2008 2009 Initial Production: August 2008 2009 Initial Delivery: 09/16/08 thru 10/31/08...
Please refer to following thread. http://priuschat.com/forums/prius-modifications/36342-another-thermistor-hack.html Ken@Japan
Can the scangauge display MG1 RPM? Ken@Japan
Would you please explain a scientific theory about "try to keep your instant MPG at least half your speed" part? Thank you, Ken@Japan
Glad to know you did it! Assume you posted on wrong date. It should be on April 1st, 2011. :) Ken@Japan
Adding to Tom's comment... There is another situation seeing no arrow and non 99.9mpg gliding. After completion of warming up (above 70C:158F...
Have you ever thought to express your thank you messages to the original Windows version software author and the modified ELM327 version author?...
I believe your EU Prius does not have the bladder. Ken@Japan
Adding to Jm's comments... chassis stiffness was improved rear seat height was lowered to get more head roomKen@Japan
Watching CAN bus messages, the accelerator pedal value is shown between 0 and 200. The HV battery ampare value is almost zero on the pedal value...
Hi Tramp, The A/C compressor is driven by inverter from 201.6V line. Please refer to page 3 on the following article....
