Separate names with a comma.
The 12v battery in a Gen 2 will typically be dead after sitting 2 months due to normal parasitic losses. Depending on hte condition of the 12v...
For the non-believers.....the corrosion was bad enough that once it was all cleaned off, it had eaten away so much of the pin, that the pin fell...
The level of corrosion on those pins isn't all that bad. There's a LOT worse out there that still work fine. I've got some photos from aa 2006 I...
Hmmm.....Michael Moore.....a lighting rod who has become what he seems to despise...wealthy As with everything else in the world, who hates him...
Come on now, we know you framed it and hung it on the wall. Admit it. Didn't Trump restart the manned space exploration program that was suspended...
So you put a 100 amp load for 30 seconds on each individual module? The voltages in your chart show the module voltage immediately prior to load...
Charging 28 modules in parallel would be challenging. The 28 modules would divide the available current based on module internal resistance. In...
@fullylaced1 If you're in no rush for these fasteners, PM me your shipping address and I'll send you a handful so you can do the job right. I...
So.....the car threw a P3015 code..."Block 5 becomes weak"...............but you don't suspect Block 5 to be a problem? Gen 2 module blocks start...
That is the plug end of wire frame #2. Good call for those who said damaged wires, because that is most likely a goner. The corrosion levels you...
The wires for that sensor pass through a rubber grommet in the passenger floorboard and connect to the cars wire harness on the passenger side of...
I'm going to go with this being a Torque problem. The P0A80 and P3015 are pretty clear on their meaning, but having 13 blocks all reading a -330v...
The least amount of headache would be to take it to a tire shop and let them remove 'em. Any good shop will have the special tools for it. It's...
@Pro-289 I'm glad you were able to get the car fixed. Sometimes you have to do what you have to do. Unfortunately, anyone who comes to you and...
One thing you may want to check is whether the inverter is sending power to the compressor.
I may have missed this in an earlier post, but why are you replacing the AC compressor?
It's pretty simple really. I've done 6 (six) inverter cooling water pump replacements where the owner was also complaining about the AC only...
Sometimes, intermittent AC operation is due to the inverter cooling system not functioning properly. Before you go spending a bunch of $$ trying...
If the tow truck driver connected his cables directly tot he battery terminals, then all the battery connections are fine. Most likely, when...
Glad you found it and everything worked out. Don't feel bad, every single person on the forum who builds batteries was a rookie when they started....
