Separate names with a comma.
None switched. Edited pics attached. [ATTACH]
If we knew where you were... ? You have a very bad "head gasket" with likely a warped head and scored cylinders. Probably have a bent rod by...
Installed an Auxbeam H11 LED in the drivers side to compare with a regular halogen on the right side. In person the halogen seems to win...
I know the gen2 and 3 US engines have a vin plate on the back passenger side. Which is usually gone if you buy a junkyard engine. Pretty sure...
Keep us updated
Mongoose is the factory recommended cable for Techstream. $495 in this ad. [ATTACH] Of course the mini vci clones are less than $50. Some...
As long as light at the end of the tunnel is not the Head Gasket Express. Hopefully the engine was not allowed to run hot for more than a minute...
Most likely a cable is not on 100% or the pcv or other hose is disconnected.
Gen2 cats are not the easiest to take but they are the most valuable. Gen3s and most other cars are not as valuable. It is happening in any...
As Chapman suggests, you are brake by wire all the time unless the fail safe solenoids open properly allowing limited pedal driven hydraulic...
The cheap way is to reuse the bolts. The downside is they may stretch with resulting loosening. Then the head gasket fails again. I have seen...
I would think the driver's door switch module is bad. The windows are computer controlled, meaning the switch tells the Main Body ECU what you...
The Car Care Nut master dealer mechanic thought they were great until he got his own shop. Dealers and owners that subscribe to Consumer Reports...
I agree. Not everyone wants to diy because they can afford to have someone with experience do it. But very few want to overpay a billionaire...
You may have to take the aux battery out and have them load test it.
Age and heat kills hv batteries. Be sure the battery cooling fan is not clogged or the intake is not blocked. On a v wagon the intake is under...
But the dealer will rebuild the head
You use the 3rd gen exhaust, egr cooler, valve, piping and wiring.
The whole thing.
A problem with Priuschat advice is everyone assumes the op has all the tools, scanners and experience needed to diy. In this case "wild guess" was...
