Separate names with a comma.
if nothing else pull the block drain and install it there. It's on the back side of the ICE and easily accesable.
Dan look at the diagram of the cylinder and you'll see the master cyl. piston is larger than the stroke sim. and the fluid just returns to the...
Dan it dosen't lock because of the rear piston inlet check valve being off the seat till the piston gets depressed far enough to have the front...
Niko, now look what you've done, you have people on holiday using an amphibious Prius with an impeller.
Evan, you off your meds?
I would belive that one large cattle feed lot would produce more methane than a hydroelectric dam.
hmmm the first 10 years, so is BC off the hook as we haven't had a major Hydro dam built in the last 10 years and most are in the 35-70 year...
it would be interesting to see what the 125HWD unit would do on a Prius. 3" diamater by 1/2" thick shouldn't stick down too much lower than the...
it has been reported here before. No repeat problems as far as I remember.
oh and a horn to warn you, your going to be there as well as them. At least that's what most do here. Although some don't bother with the horn...
they also put a steering wheel in the car to use to avoid hitting the other vehicles that are starting into the intersection.
the outer portion of the fender is steel the inner liner is plastic.
probably from the description of the problem it was probably the inverter.
? it's a car not a boat.
The temps are taken with a MiniScanner that reads the temp of the engine via the temp sensor in the block. The temp for the 53-57 readings were...
submit the Dr. bill to get your refund!
Thanks Evan for posting that. This should help people get their head around the charge/discharge display of the Prius.
"has anyone ever had a cold starting problem with a Prius?" yes me, I don't start well cold and the sooner that the heater blows warm air the...
how much heat transfer do you get? over night plugged in full time 53-57C approx 130F, 2 1/2 hours on a timer 35-41C approx. 100F it totally...
just looking at the Master cylinder, I wonder if the volume displaced by the rear piston till the inlet check valve goes on seat is the same as...
