Separate names with a comma.
What data do you have for battery block voltages from the HV battery ecu? .
Kudos to you. I am not going to read a post that long, that does not use basic English rules (paragraphs, punctuation, capitalization, etc.) The...
Hello and welcome to PriusChat! "White smoke" out the tailpipe can be coolant, oil, or fuel. Coolant into the combustion chamber is usually...
That trough is there to "collect" the RTV that squeezes out as you tighten the bolts down. If you just have two flat surfaces with even edges,...
I push some Vaseline into the oil pickup port then rotate the pump to "suck" it through. Do that enough and it'll seal the pump. "No" (less) drips...
The ones that I use have a subscription for updates - the super duper ones also have "advanced online hand-holding diagnostics". No subscription...
Interesting. That's a high end Snap-On scantool and certainly is capable of scanning all systems on a Gen2. (I have a "mid range" version at work)...
I would imagine it looks like this from the user manual (just color).[ATTACH] .
I have the paid version of Dr Prius on my android phone, so I can have the app record battery data while driving the car, with heavy accel and...
I would not be that concerned about the heater circuits on pins 1 & 2. If the sensor is putting out 800 mV then it's getting "hot enough" to work....
Maybe Leadfoot can walk you through what he does with screenshots of the process. On the AP200, I can do a "system scan" that checks everything...
What voltage do you see on your scantool for the downstream oxygen sensor? Check at different conditions while the engine is running. What brand...
Cloyes is now just "a name". They were bought out a few years ago and quality has been reported as very spotty. I wouldn't use them if I had any...
Before, you were getting about 500 miles on a 42 liter fill up. Now you are going only 420 miles. Is it still the same 42 liters? I want to know...
My favorite is HondaBond (RTV). Good balance of working time vs oil resistance. Gotta get the sealing surfaces completely clean and dry....
Valve spring pressure on the camshaft lobes can push things around. Just follow the service manual procedure and put the chain back on. Then...
What are you using to measure the cam and crank signals? A scope with the proper settings will display the actual waveforms. Both sensors are...
I would inspect the bolts that secure the steering shaft to the steering column and the steering rack. Could be some looseness there and tire...
What O2 sensor code are you getting? If there's a problem with the upstream Air-Fuel sensor, it will mess with the ECM's ability to properly...
Given the context of that diagnostic report, I am changing my opinion of what the master warning light is doing in this case. The ABS code C1256...
