Separate names with a comma.
There are MANY different scantool devices available on the market, and most of them vary hugely as to their capabilities. Some might only...
Just hit "continue" & see what happens. When (this version) TS tries to connect to the car it first wants to check in with Toyota servers. Usually...
My experience with many "good" cars over the decades is that using 1 qt (or less) in 3000 miles is fine. However, the car manufacturers set a...
Yep, I think it does. Normally, the ecu is "happy" at around 60-75% State of Charge (225-235V). The dash gauge reads 1 bar at 40% (about 206V)....
Could be that the level sensor in the tank is on its way out, and is showing one pip on the gauge when the tank is actually about 1/2 full....
I didn't recall Toyota's naming of it, but the 2nd pic has "power resource VB - 200 V". So the HV battery is down to 200V. Battery ecu data...
Are there any codes in the battery ecu? Usually if Hybrid vehicle control has P3000 there should be codes in the battery ecu as well. With...
So, the high voltage battery pack on a Gen2 (and most Gen3 and some Gen4) Prius is made up of 14 blocks connected in series. The battery ecu...
It depends on how much the new battery will draw during charging. The DC-DC converter can supply 14V at about 100A through the main fuse to power...
Considering the labor overlap, I would think about replacing the heater core, maybe "cleaning" or replacing the actuators for the A/C air doors....
What error code do you have? .
Yep, it works until it don't. Haven't had to do much of anything on a Prius regarding the fuel system. Have done a few tank assemblies on...
Every TPMS sensor I've worked with has either a 8 digit hexadecimal ID code, or a 10 digit decimal code (that can be translated to a 8 digit hex)....
Please start a new thread regarding your problem. .
My usual procedure for suspect head gaskets is to pressurize the cooling system overnight. Next day remove the spark plugs and inspect the...
Getting flash codes can be useful - IF all you have is a paperclip AND the codes are in a system that supports flash codes (like brake control)....
I despise fusible link "assemblies" as it becomes a complete PIA to deal with a situation just like yours. If at all feasible, I try to bypass...
You should use your scan device to monitor Engine Coolant Temperature while driving. ECT should increase (while the engine is actually running)...
So, for a TPMS sensor to work (display data on a scantool and be capable of turning the light off), you need several things. The sensor has to be...
Here's a few questions: Have you done oil analysis on your other Gen2- are they any different? I would expect (guess) that more stop & go driving...
