Separate names with a comma.
Tire was blown out, I can imagine that if there was zero air left in the tire, rim against the ground, clearance would be pretty low to the...
+1 on getting a dark colored dashcover. Sheepskin? I had genuine Merino sheepskin seat covers in two of my vehicles... in 1990 and 1998 lol....
I would clean it well, clean up the hole with a file, knife, etc. Then cover the hole with several layers on both sides of the hole with some...
Apparently, CO2 leaking into the coolant will bubble through the test system and acidify the test liquid, causing an indicator (pH) to change...
From the description and pictures on the product packaging, it would appear that you overfilled the test chamber/apparatus. Overfilling the fluid...
The info on the product on Amazon says it is normal to have bubbles present. It's the color change that indicates the presence of CO2 and a bad...
Sticking brake caliper slide pins can also cause uneven brake pad wear between inner and outer pads. The slide pins should be removed, old lube...
Low profile mini. SM-G781V ?
Pin? Do you mean the tension clip? SM-G781V ?
If I had to put money on this, I'd go with a vacuum line not connected, or improperly tightened throttle body bolts causing a vacuum leak. Sent...
A flat file can be used as well, it's slow but you have a lot of control over where and how much material you are removing. ...
Thanks, that makes more sense. SM-G781V ?
Are the PCV valves in the diagram backwards? The threaded portion of the valve is in the block, no? SM-G781V ?
Have you seen/read this thread yet? There's a lot of information on the harness required to make them work....
I'm surprised that the blue filter isn't thoroughly saturated with oil and dripping and possibly spraying (with forced air from the radiator fans...
Yes, I realized that after I posted it. That's why I inserted the "Edit" comment, rather than deleting it. I guess it could be confusing. Sent...
The PCV valve is a one-way valve, so putting it on the outlet of the OCC is backwards. Edit: disregard above it's incorrect, it's still early in...
The above post came from this thread: In it, I have more details on my mounting bracket in my location and the fine stainless steel mesh I used to...
I've relocated my PCV valve to the catch can, it's on a hose from the original PCV valve location that's about 24 inches long. Sorry, I don't...
Also, if you cut the plug in half, the core should be solid copper. The cheap Chinese counterfeit ones have steel cores. SM-G781V...
