Separate names with a comma.
I'd go with that as well. Here's the new OE pack I just put in my 06 last week. [ATTACH] .
So.... The radiator fans did NOT come on before when you had the A/C turned on? But now they DO come on? .
I don't know of anyone who sells that LED specifically for a Prius. I would expect you would have to figure what type of LED it is (the form...
I missed the "mid point update" in the first post. If there was a fault that triggered the master caution light (unless it was low engine oil...
Do the both of the radiator fans work? If so, then at what temperature do they turn on? What temperature reading does the scantool go up to? If...
So, what are you capable of doing? (as far as diagnosing this problem). P0101 is set when the ECM sees a reading from the MAF sensor that's way...
Hello and welcome to PriusChat! A common problem that happens is that the orange safety interlock (fuse holder) is not installed correctly. It...
If your ELM device works with Torque, then you should be able to "turn on" the Gen2 Prius add-on data lists. BUT you need the paid "pro" version...
Car Scanner is very limited on a Gen2 Prius. It can (sort of) scan the ECM, hybrid control, and HV battery ecu's. AFAIK it only has freeze frame...
What are you using to check codes? You might need something more capable to "talk" to all the systems on a Gen2 Prius. Here's a thread that...
You should get a capable scantool and see what codes triggered the "master caution" light (RTOD). Most scantools can't check all systems on a Gen2...
This is the connector at the tank.[ATTACH] .
Most likely cause is that you have a worn spot on the fuel level sensor inside the tank. I have had to replace 3 or 4 fuel tanks on customers'...
As mentioned, one possible cause can be the radiator - condenser fans do not work. Turn the car on (ready) and then turn the A/C on. Check...
If there isn't lots of rust on the rotor faces (shiny area where the brake pads press against), then leave the brakes alone. 3mm is getting...
So, I don't expect that the assembly error did much - the battery ecu would have had a hissy fit and not allowed the HV contactors to close. If...
The snap on modis is a capable scantool and should do everything needed. .
The clicks are the HV contactors (relays) at the battery. They are quite loud if you don't have all the interior panels back in place. You NEED a...
I have had this behavior happen a couple times (but never when I have my scantool connected to collect data). It's always under the same...
Car Scanner is a decent app - for a Gen 3 or Gen4. On a Gen2 it can only get some codes and data for ECM, hybrid control, and HV battery ecu's....
