Separate names with a comma.
For a picture, go to Amazon and search for B0C9TKR42L. The part is $10 from there. It is even cheaper from a dealer: Fuel Filler Opening Lid...
When the car is cold? That is absolutely not normal. If the car is warm now let it cool off (until the radiator cap is ambient temperature)....
The one time I had to deal with that I found that if the fluid was low at the radiator cap and the overflow tank adding fluid at the former...
Looks like the car is doing its best to tell you: problem with the braking system.
Probably not the issue, but check that your 12V is still good. These cars do odd things when it is too weak.
Given how filthy that fan is it is a little surprising to me that the battery itself isn't dirtier. Check the wires, they may need to be replaced...
The car has a mechanism to grab the key fob so that it doesn't fall out while the car is on. Clearly something is affecting that. I believe that...
Contact Autel support? Either they tell you how to get those codes, they tell you that you cannot get those codes, or they don't answer. Two out...
The front and back ends of the pinch weld on the 2nd generation have a reinforced section specifically for accepting the car's scissor jack and...
I didn't notice that, but it has been a while since I used the scissor jack. The way the (old, but not recalled, Harbor Freight) jack stands...
For the front end, first drive the car up on a pair of 2x10x~16 boards, chock the back wheels, then use a 3 ton floor jack on the front jack...
That looks really nice. Garaged? It doesn't really prove anything though, because we don't have an equivalent car that was waxed. Even two data...
ONLY from an actual Toyota dealer's web site. Not from Amazon. Not from Ebay. Not from some random internet site. Install a low quality part...
B1421 just means the car was in the shade. It is literally what it says. "Solar sensor" == "is the car in the sun".
The bumper needs to be lifted up and shoved in so that the visible loops go over the sort of hook things that hold it in place. However... Pull...
There are a few small bolts that require a very low torque value. That includes the ones on the modules in the HV battery. For those use a 1/4"...
Much better that it be the 3 way control valve than the ABS system.
Yes, there were unambiguous about it. Unfortunately their statement is pretty equivalent to "don't wash your car with water", that is, it is so...
I would truly like to know how an inert substance like wax can damage a relatively robust and also inert material like clear coated polycarbonate....
The black dust doesn't mean the motor is bad. All electrical motors that use carbon brushes accumulate that stuff, and usually it just falls down...