Separate names with a comma.
I would think its the other way. The transmitter in the car fed by large 12V battery and with larger antenna would provide much further coverage...
Either 1) They form (crimp? stamp?) the washer after it was put in past the threads, so it changes the hole diameter and does not come off. or...
There is a thing called "RF ID blocking wallet or pouch" or something similar. Just put your fob in one when not in use. No need for foil.
Code grabbers and scanners existed for a long time now....nothing new here. Not sure if this technology would work for Prius (does it have a...
The worst things you can do to your HID headlights are 1) Turn them on and then off immediately (less than a couple of minutes of running) -...
If this is your first car, and you just want something reliable with low maintenance cost, I would buy corolla or civic. With prius out of hybrid...
I just replaced mine... the original was still rattling at 165k miles, but had visible oil deposits inside. It was not too difficult to unbolt. It...
I have a Bosch gas stove and baking oven :) it is good so far (5 years) Out of automotive, I have only used Bosch wipers, and they were good but...
Alternatively: similar type of plastic + heat gun/soldering gun. Melt, cool down, bondo, sand, and paint - Alex
105 in 75.... thats +30 mph and would be ~ $1000 ticket here in GA - Alex
Practically no difference for gas mileage at temperatures above freezing. Big difference though is in service life - I would change dino 5W20 in...
I'm impressed by your OTHER jack stand :) at the last photo - Alex
OEM HID housing does not exist for Gen 3 Prius. Only LED and Incandescent were installed on the car. There are 2 ways to get a HID in Gen 3 Prius...
Yes, there is a center jack point. Located under the battery approximately. [ATTACH] - Alex
Wherever you get it from, get 2 as you need to replace them in pairs to prevent car from being uneven - Alex
Ha, I have 2005 with 162 000 as of now, and there is nothing frightening about it. I plan to keep it for another 2-3 years. If something breaks I...
Thanks! And please come back with your progress and discoveries. It was an interesting conversation and your feedback is appreciated! Alex
If you blow powerful compressed air at the fan, and allow it to spin very fast, you can damage the electronics connected to the fan. The fan spun...
Lower resistance = higher current, hotter filament. In turn, that equals to higher brightness. Hotter ( but within specification, unlike too low...
Thanks for the info! Alex
