Separate names with a comma.
I am getting the P3006 Code, meaning an imbalance in battery voltage, which seems to translate to "Replace Battery" from other discussion on this...
I could not find my 1/2 to 3/8 converter for the torque wrench. As such, I used the breaker bar to make each old a little tighter than I would...
The slide hammer I rented from O'Reilly's did not work. It was not able to lock on the hub. I ended up using a small sledge hammer and in the end...
Can you show me what kind of slide hammer I am looking for? Is this a tool I can get on loan from auto part shops?
Any good tricks to remove the wheel bearing assembly from the backing plate without the thin metal plate breaking free and the brake line getting...
I had been hearing a humming sound from the rear and finally figured out that it is the driver's side wheel bearing. Ordered a replacement from...
Took three pictures to see if I could show you [ATTACH] [ATTACH] [ATTACH] The other three bolts do not have threading to the end but this one...
Are you say that I can just pry them apart and then try to remove the bolt from the transmission?
Day 8: yesterday actually. Started okay but ended in a disaster. More pictures of damage [ATTACH] 1. Drained oil and removed oil filter [ATTACH]...
Day 7: I know I am working slow but not trying to push. More in the groove now though I hope. Day 5 and 6 were more or less wasted days. 1. Used...
I know I just wasted way too much time on the hose clamps
I spent hours today trying to get one clamp off. Going to try cutting the other one off using my roommate's dremel.
I don't understand what you mean? Do you just cut the hoses? I am thinking I should replace all hoses anyway. I have had two hose clamps now snap...
Day Five and Six: Been a while but been busy studying for Security+ (IT) Passed the test BTW 1. Removed Fuel Line Used a standard disconnect...
Day Four: Another short day due to working last night and working tonight as well Need to get sleep for work tonight. This website is also the...
Day Three: Yesterday it was my birthday, so wanted to spent one day not working on things. Did not study either. Studying for a cyber security...
Day Two: 1. Removed air box. Two 10 mm screws on engine. When I last removed the air box, the hose clamps were not worth trying to reuse so...
The insulation is falling off the underside of metal wiper tray where it is over the engine. I worry about fragments falling in the spark plug...
Starting this as a new thread. This is going to try to be as "Step by Step" as possible. Also so I can look back if I need to. Everything "small"...
Not started yet, so not going to start a new thread I am at work so cannot measure anything but do you think a 6x8 tarp would be a good size to...
