Separate names with a comma.
Thats funny. This is the same one I purchased but mine is 3 feet. Tried at in the house and looks like it'll do the job.
No antifreeze in the oil or signs of in the cap. This maybe a start of a gasket going bad. I got a scope today so on the weekend i'm going check...
Thanks for the input. I'm do for an oil change in 1000 miles. I have always done my own oil changes with 0w20. Oil still looks clean. Winter get a...
Looking at a scope on eBay for around 21.00 that plugs into my iPhone. I’ll let you know switch one after I test it out
Thanks for the clarification. When I did the block test I did not here any pressure when I opened it up. So maybe the head gasket for now is OK....
To check using the reservoir trick, do you open it after running or when its cooled down?
Cleaned all 4 ports really good
It was cleaned about a month ago and passages were not blocked. Did not clean the Cleaned everything but the heater
If the leak tests passes would you try a catch can?
Will do Thanks
Hello, I have a 2010 Prius and am getting the rattle on start up some mornings not all. I have cleaned the manifold, EGR, pipe. The car has...
Trying to program a new key with techstream software. This is not a smart key. All I have is a plan key for now. Ordered a uncut key/fog online. I...
You can only bleed the ABS thru the techstream software (or similar software).can't do it manually.
Thanks everyone, All is good I bleed the ABS ECU with the techstream software which was a little tricky but got it done.
Replaced the Actuator and now have many codes c1203,c1392,c1364,c1345,c1247,c1246 I think it needs to have the actuator bleed. I do not know if...
Cr94 have you ever bled brakes using this method? I have seen this on youtube and looks like it should work
There are a lot of VIC mini techstreams out there does it matter which one or certain version?
Thanks for the reply. The techstream is needed to bleed the brakes after actuator replacement?
I have a 2010 Prius and according to Toyota the ABS actuator is bad for a tune of 4000.00 dollars parts and labor. I have a rear sensor error and...
