Separate names with a comma.
One more question. According to the repair manual a TCM and smart key module can be replaced without further action which seems strange to me...
Just an update on this post. The car still does not start. Ready doesn't turn on. What i did was read all the data from the prius, prius-c and...
I have a 2010 non starting (ready doesn't light up). At the latest scan i only got code b279a tds communication line high fixation. My car is a...
[ATTACH] [ATTACH][ATTACH] With Techstream i found this fault code. Also found that the start permission is not being received. Also found that...
Yes, i even tried other safety switches. Also measured the resistance from the switch. What i also noticed is that wen i turn the ignition off i...
I am in the proces of resurrecting an 2010 Prius. I am at the point that i don't have any more fault codes but the car still does not go to ready....
I found both connectors and they were in good shape. The problem was with the ground connectors on the valve cover. Gave them a good clean and all...
Thank you Chapman F
Hello, I'm resurrecting a Prius. I'm in the stage where i noticed that when i connect the scan tool the check engine light turns on. Removing the...
[ATTACH] Received the battery fan motor today. No more fault codes except for the ABS module. The triangle is gone but still no start. The faults...
A little bit of the history of the car. The car driven into deep water. Drove 2 days without a problem. After that it wouldn't start. They tried...
Jeay, i received the TCM. Plugged it in and it worked right away. P came on, the scantool saw the TCM and no fault. Still no start. On the dash i...
Once again thank you for the insight. What was a problem for me was the blinking security light. I assume that if the tcm is not working it might...
Thank you for the clarity on the purpose of the TCU. I took the TCU out and opened it. Seems like water was in it. Corrosion on the connector pins...
I recently purchased a 2010 Prius with 60kmls. The car looks nice on the inside and out. Where i live there is no Prius specialist. from what i...
I had this problem on a CT200h. There were some fault codes about steering angle sensor and zero point thing. Forgive me for not knowing the exact...
I sucseeded in installing the pushbuttom start by using the wiring diagram of a Vitz/Yaris. Even without the wiring diagram it's easy to install
i have recently purchased a 2012 Aqua, same as Prius C, with the traditional key. I want to add push button start to it. The only problem is to...
