Separate names with a comma.
. perhaps this report can help
Yes it drives normally with no arrows but it doesn't charge to the point of have green leaves icons.only after the code appears does it runs on...
after resetting there were no arrows and no error codes,error code came after driving for some days
i s that what the blue and purple cable is for?it seems to be coming from the lights as it moves to gether with those cables.where should it be...
l did the reset by disconnecting 12 v batterry but the arrows still not showing.after speeding with aircon on it gave an error code P0A80.
After realizing this we opened up the HV battery cleaned the boss bars and the nuts boxed it up. But still the energy flow arrows were not showing...
Guys so l got a OBDLink SX Scan tool. l got this report with car in On position and idling.The car is running and moving after replacing the below...
Thanks
will consider when l get a bluetooth OBD2 scanner the one i have it uses wifi
Thanks will do that because running it again.could that be the solution to the other codes?
Hi guys so l replaced the two cells which where under 7V,while doing that l cleaned the corrosion in the HV battery connectors and pins. The...
Thanks is similar to posts received so far
yes l use torque pro and dr prius on android
Last time l got the P3030 P3000 volts .It couldn't help much. Need an advanved scanner.l have a wifi scanner it doesn't pick anything in HV system...
Thanks for the info,will try to charge the 6.8V cell to see if the can hold above 7.3V,l had this car since 2012 done over 200,000km,the ready...
can you show me in the picture l just sent
yes i did plug all the way.was measuring between those two cables in the picture
am working on a prius 2005 which has been flashing the ready indicator for one second but not running.l measured all cells and found 1 dead 0V and...
Scanned again and am getting P3030,P3000
