Separate names with a comma.
In 2010 I got some Corolla steel rims from a Toyota Dealership for $70 CDN apiece. This was about 3 weeks after purchasing our 2010 from a...
Yes. I would give that tire shop some "feedback".
We've got the stock, from-the-factory LED's. Owner's Manual has info on changing the regular headlight bulbs, and for the LED's it just says...
Basically Depends for engines.
I've had that happen, territorial imperative in action, I guess. :rolleyes:
Not sure if you have to be Canadian for this; don't see how they could verify: Canadian experience with vehicle headlights and glare at night...
Your mid-terms can't come soon enough.
Battery on my last Casio died a few months back (not sure but I mighta bought it in a previous century...). I tried to replace battery, something...
^ That's a no-no. :confused: Fronts would possibly have more overall wear, and rears might have somewhat eccentric wear, more on the inside edges...
In the Tom Clancy book Debt of Honor, there’s a paragraph, that explained “money”, at least for me. I’ve kinda forgotten, should dig it up again,...
For a one-off, I’d probably just get a piece of flat bar, drill a couple of holes.
The infamous EGR system might also be part of the problem.
Googling: "how accurate are torque sticks" The AI summary is somewhat mixed. One thing I noticed, just with a quick read, they tend to work...
Well, Toyota USA. Toyota Canada recommends to change brake fluid every 3 years or 48k kms, whichever comes first. This was not the case when we...
For the scissor jack, the size of plywood needed for use on loose earth) is maybe 6" square. It's an uphill battle Georgina, trying to convince...
In part 2 of the videos in post 3, he mentions for the bottom end, piston arms to crankshaft, a 12-point 14mm and 10mm socket are required (around...
You could do it yourself: remove one your wheels and try. I've done this with our gen 3 and it was fruitless: it got about 3/4 of the way into the...
Concur. Bring along a bell housing bolt to check diameter and thread pitch.
I'll stick with scissor jack, and a small square of 3/4" plywood, to serve as a stable base if I'm pulled over on a dirt shoulder. Wrestling with...
A lot of DIY’rs sans a restraining device for the pulley hit it with an impact, relying on inertia to spin the nut down fast, before the pulley...
