Separate names with a comma.
The tray was clean and all of the nuts that came off of the battery posts were clean. If I clean the battery and use the hobby charger to cycle...
I am in the process of reconditioning the hybrid battery. I have run across an issue that I have not seen discussed. I have small amounts of...
There is a vent tube attached to the battery. Do we need to get a battery with the vent tube or does it not really matter?
So I have a 2014 Prius and the 12volt battery is dead. A jump start got the car going. I took the battery to autozone because they say they will...
The car was misfiring upon starting. So I decided to change the spark plug in my 2012 Gen 3 Prius. It has 250,000 miles and the spark plugs had...
I was able to complete the procedure. I had to clear the memory to do the linear valve offset procedure. All of the other problems went away...
As it turns out, I am part of the “Some miss the second part” as I did not slide the orange handle. While I did not do the air bleed yet, It does...
I bought if from Tactrix. Which Techstream tab do I open to view the hybrid battery codes?
1. I only changed one part. The part (brake booster assembly) is new from ToyotaPartsDeal.com 2. The OBDII Tactrix 3. I did install the orange...
The warning is at the very beginning of the procedure. I never get to even bleed the first line. I have connected a charger. The charger...
I connected a charger to the battery. When attempting the air bleed … it tells me to confirm several things have been done and then click next....
I am wondering if my 12 volt battery is not sufficient. When I started it was 12.39 volts and around 12 volts when I finished. Should it be...
Maybe I am on the wrong page. The following is all I have via ABS/VSC/TRAC Data List
On startup there is a request for Java Runtime Environment version 6, update 7 (1.6.0_7) or later. As I recall this was not necessary. Please...
Yes I can view the ABS/VSC/Trac Data List. Regarding voltage: Voltage of Stroke Sensor -0.35 Voltage of Stroke Sensor 2 -0.33 Regulator Pressure...
A have change the brake booster assembly and have reconnected the wiring to the assembly along with the hoses. I have refilled the brake fluid...
The flare nut (not sure if it is a nut as the threads are on the outside) on the end of the brake line is a 10mm by 1mm. I bought a nut and bolt...
I am not familiar with a flare nut. Is that the nut on the end of the brake line?
I need help with a situation. I decided to replace the brake booster assembly. I purchased from Toyotapartsdeal.com. I took the old part out...
My problem (brake lights) was initially noticed as of my October 21 post. As I mentioned, I changed the front brake disks and pads and made...
