Separate names with a comma.
Module rehydration: Re-hydrating the battery modules. | PriusChat
$225 shipped. This is the original pack from my 2005 Prius. I purchased this vehicle last Fall with 58k miles. Soon thereafter, I was able to...
SFO is right on the money. Frank1234 also. "It sounds like you failed to let the battery properly rest for at least 30 minutes, or didn't...
It will NOT fit. With the hatch open, there is 27" from the battery, to the hatch hinge area opening. Side doors also too small to fit through.
Dolj and sam spade 2 are completely correct. You can NOT " recover or restore" worn out battery cells. The million dollar question is: What...
Voltmeter on the battery should be the accurate reading. The charger reading must be off. Charging a "good" module at 6.5a, the voltage does not...
[ATTACH] Post # 280 I wrote: On the highway during the Summer, 58mpg at 60mph. The included pic shows a 23 mile trip from one town to another, 7...
A test meter attached to the battery, while be charged, will let you know EXACTLY what is going on.
The corrosion does look bad, however underneath the nuts it usually is perfectly clean. This is what matters most. I suggest removing two nuts on...
Don, I also have a 2005. I've measured by undoing the positive cable at the battery, and letting the current flow through the meter. 16 to...
The chargers you ordered will not let you down. They work fine. One meter measures the pack voltage, the other current flow. Discharging the...
A trickle charger/battery maintainer for the 12v battery is used by many people, to keep the 12v fully charged. I use one myself, as many trips I...
This post was intended to address the tricky step of leak free module resealing only. A big thank you to "fotomoto", as the two links he posted...
James, I'm glad all this info was useful to you. :) (1) Chargers were designed to operate without heatsinks. Yes, space them apart! (2) I've...
Yes, it is a NIMH pack. Since the "pack" will not fit a Gen2, I removed all 28 modules from it. :)
James, I am using the "MEAN WELL Constant Current Mode Switching LED Driver Power Supply, 350mA 28-100VDC". ($14.25 ea.) The output is EXACTLY...
The module rehydrating process is an amazing tool to keep older hybrid packs in a "like new" state. What is great about rehydrating, is that it...
You are correct. Torque Pro displays module "pairs". Investigate if a block (pair) is low.
Yes, you could install a harness to each module, OR spend MUCH less time and purchase Torque Pro for $5. A Bluetooth OBD cost me $12. See pic's...
OK, so your back to running well. Excellent! Let's keep it that way, by doing a little work, and barely spending any money. 1) Purchase Torque...
