Separate names with a comma.
Yeah, I missed the thread that he had linked to before responding, so I edited the post. Back to searching for a solution to my own issue :)
Good luck with your fan replacement. I may be looking at the same procedure as my fan stopped working suddenly as well.
IT LIVES! I finally got the washer shipped in from out of the country (how dumb is that!) and put the tie rod on last night. After dropping the...
FYI to any future people reading this. The $22 cheap tie rod did not come with the $1 tabbed washer. The $80 does as well as the $115 factory...
It's possible to get a standard crescent wrench up in there, but try as I might I wasn't able to crack it free. I was able to find a tool that...
The Inner rod assembly. such as this Http://www.carid.com/images/mevotech/suspension-parts/mev80304.jpg The tool that i was able to borrow does...
I did see fluid come up out of both bleeders, and the pump even sounded different once I did that, which has me a bit worried about this blockage...
Yes, and in my experience, a bad 12V will cause all sorts of other weirdness with these cars. Ours seemed to go through them very quickly and...
it looks like it should be pumping into the resivoir from the front hose and flow down and out the back into the inverter? I'm not getting any...
Got the fluids in the car last night and it's running again! No leaks from the MG2 endplate so far (fingers still crossed) Rather happy about...
So far I've got about $80 in parts and about 10 hours into it, but that's partially because of things like removing sheared off bolts and...
Finally got parts in and have most everything buttoned back up. Had a buddy just help guide the plate back in past the frame with the FIPG...
So my first real question(s) on this... How much FIPG do I use? Spread it out with a finger or just leave a bead to be squished on it's own? I...
Those are basically the same symptoms that we had in our first NHW11 before we replaced the cells.
So my wife is on her second NHW11 and accidentally ran straight over a curb at ~25 MPH. It was in a construction zone with no streetlights but...
