Separate names with a comma.
Hi there, I personally buy the Head gasket set from AutoZone ( felpro) everything works out great
That's correct if you remove the cams and sprocket as one peace, it will be very easy to getting them back together, just be very careful with the...
I just line up the sprockets to the chain dots, everything should line up
Alright my prius was finally done last night and started right up, very small amount or not smoke at all, I taked for a ride after bleeding the...
Broken hose pipe
Alright finally had time to work on the Prius again, put all the engine back together and today put it back in, about 2 hours to put it back and...
Hey amos, Ot started very slow and end up about 1qt per 200 mikes approximately
Almost done cleaning, so far cleaning is being the more time consuming task However once I get all done, assembly of the engine should go very...
Hey chapmanf, I really believe that the timen mark on the oil pump is only for reference to get the correct point to TDC mark, but don't quote...
Today's progress on the Prius engine, all the parts need to be cleaned and then put back together probably next weekend, here is some pictures,...
Some pictures from today, engine with out the water pump and pulley getting ready to be removed
Engine is out, very easy to remove with out water pump and pulley is plenty of room, I can say this is probably easier than civics lol thanks...
Hey danlatu, Is me again, wandering if you can answer couple of questions 1/2 is ther torque converter bolts holding the transmission Attached to...
Thanks again man,
Hey guys, I when over all of this conversations and specially to all of danlatu information on his engine rebuild thanks for all the pictures,...
Never mind I was able to download all the information from online, thanks
Hey danlatu, did you by any chance still have the information on the head bolts -timen cover sequence for loosing and torque the bolts?
Perfect I will probably start the project later today after work, thanks
Nice thanks raytheeagle
Hi danlatu, I'm going to do the Head gasket, just to be safe, is there any special tools for the head gasket job? Or anything special that I need...
