Separate names with a comma.
I'm in Vero Beach, about 2.5 hours south of you. Been a while since I've been through there on my way to Jacksonville..
My bet is they are cheap chinese copies...... I don't have the link, but they guy from illinois that is a toyota guy did a program on how to...
What part of Florida are you in? I'm in the central east coast. I'm not an "expert" but I do have experience.
Just be careful about "senior members". Some want you to believe the know everything, and they are never wrong. If you disagree with them,...
If they are leaking, that's different. Usually they leak because the fluid hasn't been flushed and replaced with new fluid. It would be...
That could happen on the REAR calipers. But it's NOT the abs. If you open the drivers door, the brakes will pump up the fluid and push the pucks...
You could go to autozone, or other parts store, or even walfart, and they can program them for you. That is if the batteries are good.
You don't need to remove the pulley, there are marks on the pulley, and timing cover.
It is always best to use what the maker of the item is, tells you what to use. They designed it....
If you want new, you want the Sodium ion..... Going oem from the dealer, you can't go wrong, but it will cost you double.
Glad you got it going!
Which is the proper wheel/tire size for you Prius? Using the proper one designed for the vehicle usually works
Did you get the timing set?
Seems I read somewhere that is you remove all 4 sensors from the system, you won't get the light. Since there are no sensors to report. Not...
Filled it right to the neck...
If you replace the caps, and cam, then you only have the wear from the head where the cams sit. But even .002 was close...
.001? I think that was close enough. The cams don't wear the same as the crank. They have constant pressure.
That is not true. There is no floating. There is variable valve timing. The initial timing marks must be set correctly. After that, it's...
The timing chain is the same for all Gen 3 Prius'. He will have to manually set the crank to TDC, and align the cams to the correct location,...
blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah...
