Separate names with a comma.
I can believe that. One of the reasons I hate going to the shops is I'll never know how much bs I paid for.
Run the engine on maintenance mode and watch how it leaks.
Update: and hopefully the final update for this issue. Removed the fuel injectors and cleaned them all. Installed them back on and made sure I...
Update: ECU has been replaced but I was told I had a leaky fuel injector and they wanted to empty out my full fuel tank and fill it with 3 gallons...
[MEDIA] This is probably what is happening. Mine was the headgasket being blown but from what I've read it could also be a bad coolant pump. Took...
I would have never guessed. Getting an inspection from some professionals is worth every penny. Towing was $60 and the actual testing was $140. So...
I'll get over it eventually but thanks for that info. Crazy how much some parts cost. I've been checking ebay for a used EGR and they're all...
So got a call back from Toyota Service shop and they said the ECU is bad. They somehow connect it to some other source to get it to run and the...
Update: Finished putting it all back together and still the exact problem persists. It still rough idles and then shuts off. I tried unplugging...
So right now I'm stuck. Not exactly sure what to do next. Going back to my original post is it possible that I put too much sealant on the chain...
Removed the spark plugs to see if pistons 1 and 4 were in the raised position so no the spark plugs are not currently installed. Ah gotcha.. well...
Testing this out right now. I first aligned the marks to start from there and counting how many times I have to turn the engine by hand. One thing...
Hopefully there's no issue with me bringing this post back to life but just wanted to get back online to update my situation so far. So I have...
Yeah I took the idle without rattle as a good sign but as a newbie I'm stuck. I'll check fuses sometime. I've kinda given up due to being short...
170k. I have a feeling you're right. I might just wait until summer (I'm in school right now) to take it apart and do it all over again... or I...
Update: Images are attached of the codes it throws now.. Everything is back on and plugged other than all the windshield wiper stuff.
Update: I changed the fuel injectors, cleaned the intake manifold completely and installed it back on. But rattle continues. I scanned it with...
I usually use a couple devices to scan for codes but I do have techstream and will give it a scan once I put it all back together. Will update...
Oh yes you're right, thought you were just wondering what all connects to it. I'll double check all those connections and see if I can find...
Other than the in/out coolant hoses and two plugs (for throttle body and maf sensor?) that's it.
