Separate names with a comma.
Bumped into this thread while looking for something else. I had Michelin X-Ice XI2's this past winter (just got them off this weekend), and agree...
The nav and non-nav cars are quite different, even if the specs look similar (eg: both have bluetooth, JBL, etc). In the end I got an aftermarket...
Since I haven't posted in a while I should update a bit on how the Pioneer unit is doing. Software/map updates: I updated to the Z120 interface...
The dimmer wire tells the headunit if the dashboard lights are on or not (eg: when you turn the headlights on) so if your dashboard lights up,...
As for the reverse wire, take a look at my thread:...
The majority of members who upgraded their head units are Prius II owners, so look at their threads. Do a search for "head unit", "NAV upgrade",...
The scosche kit includes the brackets, and they are plastic. You must use the plastic brackets because the trim (or surround) attaches to it....
2002 Corolla I started driving since new. My parents are now driving the Corolla and it's still trouble free. We hope to keep it for a few more...
Got them at a place called "parts source". I think it's only in Canada. If you don't have any tools, you can get a crimp and a set of connectors...
Azimuth, your car does not have the 20pin harness, so you need to use the 87-up harness and connect the wires manually. I used crimp on...
http://priuschat.com/forums/gen-iii-2010-prius-audio-electronics/76355-aftermarket-nav-install-canadian-premium-package.html Go to the third...
Both the aux jack and the 12v power jack are wired to a custom plug inside the console (you will see it if you remove the console). That plug...
Since you have the Prius III, the speed wire is not on the harness. There's no way to get it via the TYTO. Refer to my other thread for...
Double checked the schematics, the response from Metra was correct: there are only two audio inputs (left and right). There are also four data...
Finally put everything back today, and everything works! :D So here's the solution: Replace the 150 ohm resistor with 560 ohms as per PAC's own...
josharmour, there are two 20 pin harnesses, one for power, and the other for the steering wheel controls. Looks like the TYTO only comes with the...
Since you got the base model it'll be easier (no JBL, same as the Prius II). You don't need the TATO, but you need the SWI-PS and a compatible...
The NAV came off yesterday as I'll be taking the car in for warranty repairs on the dash tomorrow (plus I'll be getting the software update for...
Just to make it clear... the TYTO is different from the TATO. They should both work, but the wiring is a bit different (the TYTO is not made by...
Updated: I guess you'll be using the harness that came with the PAC-SWI (since you are not using PAC TATO). Connect the black wire to ground on...
