Setup : Toyota Prius 2006 (Australia) Single CD player (text), no SAT/Aux DICE Mediabridge MB-1000-Toyota iPhone 3G, iPod Touch 2G, USB drive, Aux cable I don't get any sound in any mode, except with the auxiliary cable. Tried all jumper settings : SAT mode (down/down) : - no connection CDC mode (up/up) : - ipod accessories connected - no sound - MFD says CD changer, with 6 CD's - display counter starts immediately, playing a 'ghost' song - press CD1 then TITLE will give title and track info as VOL, CD2 as BASS, CD3 as MID, CD3 as TREBLE, CD5 and CD6 as nothing - pressing seek/track button advances the 'invisible' tracks, and I can hear the sound of the drive motor of CD player moving MP3 mode (up/down) : - ipod accessories connected - no sound - MFD says single CD player MD mode (down/up) : - ipod accessories connected - no sound - MFD says MD Changer for 6 MD's - the rest is as in CDC mode I have no luck with mp3 in USB thumb drive too. Any ideas what am I not doing right ? Best regards.
I have emailed Customer Support. Just waiting for a reply. I have taken some photos if they can be of any help. picasaweb.google.com/107118615059568016007/DICE#
Surprisingly, it worked today. Set it to MD emulation mode. Once iPhone indicates that it was connected, I did a successive radio button press beginning with Power then CD, followed by Seek/Track. Managed to get sound and track information from then on. Apparently, all these steps must be done within seconds (5 seconds according to the manual). Glad that $250 spent was not a waste.
